Segmented floor marking points light - WT-5226
The marking dots can be stuck down quickly and easily thanks to the mounting film, saving time and money. They are ideal for heavy use and have a very good grip on the ground. If a dot is damaged, it can be replaced quickly.
- For smooth floor indoor
- Suitable for pedestrians and lift trucks
- Suitable for smooth concrete screed, EP / PU / MMA coatings and tiles
- Time and cost saving
- Simple bonding due to mounting foil
- Thinner material and so easier to clean than WT-5126
- Fast replacement of damaged stripss
- Very good floor bond
Technical Data
Application area: |
Indoor |
Material: |
PET |
Thickness: |
0.2 mm |
Liner: |
Silicone paper |
Surface: |
Glossy |
Adhesive: |
Acrylic |
Adhesive property: |
Permanent or removable |
Temperature resistance: |
-20 °C to +70 °C |
Application temperature: |
≥12 °C |
Further Information
It is possible to drive over the belt with floor conveyors. Turning and twisting on the tape with floor conveyors or similar heavy vehicles must be avoided and can lead to the destruction of the tape. To achieve optimum adhesion, the substrate must be free of release agents such as grease, oil, surfactants, dirt and dust. Store in a dry and UV-protected place at 10°C to 25°C.
Data sheets