WT-5412 Anti-slip tape - extra rough R13
WT-5412 is a coarse-textured anti-slip tape with an aluminium oxide grain, which is firmly bonded to a PVC backing by means of acrylic resin. The tape is self-adhesive and easy to apply. It is used to mark danger spots and as anti-slip protection. WT-5412 has a slip resistance of R13 according to DIN 16165 and is ideal for high foot traffic and a high degree of soiling.
- For smooth surfaces indoors and outdoors
- Withstands intensive foot traffic and light lift truck traffic
- Applicable on stairs, ramps, machines, vehicles, etc...
- Durable hold due to strong adhesive
- Durable and tear resistant
- Waterproof, chemical and mineral oil resistant
- Can be walked on immediately after installation
Technical Data
| Application area: |
Indoor and outdoor areas |
| Material: |
Mineral grain embedded in synthetic resin |
| Thickness: |
1,5 mm ± 0.1 mm |
| Liner: |
Silicone paper |
| Adhesive: |
Acrylic |
| Adhesive strength: |
1.19 kgf/19 mm |
| Slip resistance: |
R13 according to DIN 16165 |
| Temperature resistance: |
-15°C to +70°C |
| Application temperature: |
≥12 °C |
Further Information
To achieve optimum adhesion, the substrate must be free from release agents such as greases, oils, surfactants, dirt and dust. The use of an adhesive primer is required on the following surfaces: concrete and asphalt, untreated, unpainted wood, and on all rough, grained surfaces. Store in a dry and UV-protected place at +5 °C to +25 °C.
Data sheets
+49 36602 2891-00