Anti-slip tape – R13 conformable - WT-5414

WT-5414 Conformable anti-slip tape - WT-5414

WT-5414 is a self-adhesive, deformable anti-slip tape. The anti-slip surface consists of an aluminium oxide granulation, which is firmly bonded to a flexible aluminium foil by means of an epoxy resin seal and an acrylic copolymer adhesive. It is used to mark hazardous areas and as an anti-slip surface. WT-5414 has a slip resistance of R13 acc. to DIN 16165 and is suitable for medium to high loads.

• For textured substrates indoors and outdoors (e.g. checker plates)
• Withstands intensive foot traffic and light lift truck traffic
• Can be used on walkways, stairs, ramps, machines, vehicles, etc...
• Durable hold due to strong adhesive
• Durable and tear resistant
• Waterproof, chemical and mineral oil resistant
• Can be walked on immediately after installation

Technical Data

Further Information

To achieve optimum adhesion, the substrate must be free from release agents such as greases, oils, surfactants, dirt and dust. The use of an adhesive primer is required on the following surfaces: concrete and asphalt, untreated, unpainted wood, and on all rough, grained surfaces. Store in a dry and UV-protected place at +5 °C to +25 °C.

Data sheets

• Download Datenblatt - Deutsch
• Download Data sheet - English