Warning sign - Risk of slipping warning (ASR A1.3) for the ground
Provide more safety in your company with our floor signs:
- Marking according to current ASR A1.3
- Versatile use due to the large selection of materials
- Quick application due to self-adhesive backing
- Pedestrian and forklift traffic suitable
- Scratch resistant print
The following material selection is suitable for floor marking. Warning signs for mounting on walls and machines can be found under Safety sign.
Installation instructions for outdoor use: Cover the substrate with Primer Nr. 5. To prevent the penetration of moisture, close the edges with edge sealing
Polycarbonate
| Thickness: |
0,9 mm |
| Surface: |
Silk matt |
| Adhesive: |
Acrylic |
| Adhesive property: |
Permanent |
| Temperature range: |
-20 °C to +70 °C |
Data sheets
PVC (indoor)
| Thickness: |
0,9 mm +/- 0,5 mm |
| Surface: |
Embossed, slightly shiny |
| Adhesive: |
Acrylic |
| Adhesive property: |
Permanent |
| Temperature range: |
-5 °C to +50 °C |
| Slip class: |
R10 |
Data sheet
PVC (outdoor)
| Thickness: |
1,1 mm +/- 0,5 mm |
| Surface: |
Embossed, slightly shiny |
| Adhesive: |
Acrylic |
| Adhesive property: |
Permanent |
| Temperature range: |
-5 °C to +50 °C |
| Slip class: |
R10 |
Data sheets
To achieve optimum adhesion, the substrate must be free from release agents such as greases, oils, surfactants, dirt and dust. The product should be stored dry and UV-protected at 10°C to 25°C.
.jpg "Risk of slipping warning")
.jpg "Preview: Risk of slipping warning")
.jpg "Risk of slipping warning")
+49 36602 2891-00