Anti-slip tape photoluminescent - Medium R13 - WT-5416
WT-5416 is an anti-slip tape with an aluminium oxide grain, which is firmly bonded to a PVC backing by means of acrylic resin. The self-adhesive tape is the optimal basic equipment for protection against slip hazards indoors and outdoors. It achieves the certified slip protection R13 and thus belongs to the highest level of our portfolio. Our wide range of colours offers you the optimal opportunity to adapt the tape to your application areas. It is ideal for slip-resistant floor marking of production areas, warehouses, stairways, outdoor areas, driveways and much more.
- For smooth substrates indoors and weather-protected outdoors.
- Can be used on wet, smooth, oil-smeared surfaces with intensive foot traffic and light forklift traffic.
- Applicable on stairs, ramps, machines, vehicles, etc...
- Durable hold due to strong adhesive
- Durable and tear resistant
- Waterproof, chemical and mineral oil resistant
- Can be walked on immediately after installation
Technical Data
| Application area: |
Indoor and weather-protected outdoor areas |
| Material: |
Mineral grain embedded in synthetic resin |
| Thickness: |
0.85 |
| Liner: |
Silicone paper |
| Adhesive: |
Acrylic |
| Adhesive strength on steel: |
up to 1500 g/inch |
| Slip resistance: |
R13 |
| Luminosity: |
After 20 min: 1.6 mcd/m2 After 60 min: 1.0 mcd/m2 |
| Application temperature: |
≥12 °C |
| Temperature resistance: |
-15°C to +70°C |
Further Information
To achieve optimum adhesion, the substrate must be free from release agents such as greases, oils, surfactants, dirt and dust. The use of an adhesive primer is required on the following surfaces: concrete and asphalt, untreated, unpainted wood, and on all rough, grained surfaces. Store in a dry and UV-protected place at +5 °C to +25 °C.
Data sheets
+49 36602 2891-00