Suitable for non-slip marking of uneven and profiled surfaces as well as floors with anti-slip coating in production or working areas. The aluminum carrier adapts to the profile of the underground, such as checker plate.

• For textured floors indoor and outdoor
• Pedestrian and lift truck suitable
• Suitable for concrete screed smooth, EP / PU / MMA coatings, EP / PU / MMA Coatings anti-slip, tiles, concrete paving, asphalt

Technical Data

Material:	Coated soft aluminum
Total thickness:	0,6 mm
Liner:	Silicone/ PET foil
Surface:	Slightly glossy
Slip class:	R12
Adhesive:	Synthetic rubber
Adhesive property:	Extra permanent
Temperature range:	-20 °C to +120 °C
Processing temperature:	≥12 °C
Available colors:	yellow, white
Packaging unit:	25 pieces per set

Further Information

It is possible to drive over the marking with floor conveyors. Turning and twisting on the belt with floor conveyors or similar heavy vehicles must be avoided and may destroy the marking. To achieve the optimal adhesive strength, the substrate has to be free from release agents such as greases, oils, surfactants, dirt and dust. The storage should be dry and UV-protected between 20°C and 30°C.

Datasheets

• Download Datenblatt - Deutsch
• Download Data sheet - English