WT-5126 - Segmented floor marking points
The marking dots can be stuck down quickly and easily thanks to the mounting film, saving time and money. They are ideal for heavy use and have a very good grip on the ground. If a dot is damaged, it can be replaced quickly.
- For smooth floor indoor
- Suitable for pedestrians and lift trucks
- Suitable for smooth concrete screed, EP / PU / MMA coatings and tiles
- Time and cost saving
- Simple bonding due to mounting foil
- Fast replacement of damaged points
- Very good floor bond
Technical Data
| Application area: |
Indoor |
| Material: |
PVC |
| Thickness: |
0.6 mm |
| Liner: |
Silicone paper |
| Surface: |
Matte |
| Adhesive: |
Acrylic |
| Adhesive property: |
Permanent |
| Temperature resistance: |
-20 °C to +120 °C |
| Application temperature: |
≥12 °C |
Further Information
Driving over the tape with forklifts is permitted. Turning or rotating heavy vehicles on the belt should be avoided and can damage it. To achieve optimum adhesion, the substrate must be free of release agents such as grease, oil, surfactants, dirt and dust. Store in a dry and UV-protected place at 10°C to 25°C.
Data sheets
+49 36602 2891-00 
