WT-5645 - Conformable floor marking tape
Suitable for non-slip marking of uneven and profiled surfaces as well as floors with anti- slip coating in production or work areas. The aluminium support adapts to the profile of the substrate, such as checker plate. For outdoor use you need our primer no. 5!
- Adapts to the profile of the substrate
- Slip resistance R12
- Particularly for uneven surfaces
- Suitable for pedestrians and lift trucks
- As well as concrete paving and asphalt floors
Technical Data
| Application area: |
Indoor and outdoor |
| Material: |
Coated soft aluminium |
| Thickness: |
0.6 mm |
| Liner: |
Silicone/ PET film |
| Surface: |
Slightly glossy |
| Slip class: |
R12 |
| Adhesive: |
Synthetic rubber |
| Adhesive property: |
Extra permanent |
| Temperature resistance: |
-20 °C to +120 °C |
| Application temperature: |
≥12 °C |
Further Information
Driving over the tape with forklifts is permitted. Turning or pivoting on the belt with heavy vehicles should be avoided, as this can cause serious damage. To achieve optimum adhesion, the substrate must be free of release agents such as grease, oil, surfactants, dirt and dust. Store in a dry and UV-protected place at 20°C to 30°C.
Data sheets
+49 36602 2891-00 
