WT-5411 - Anti-slip strips set of 8, colored, 30x640 mm
WT-5411 is an anti-slip tape with an aluminium oxide grain, which is firmly bonded to a PVC backing by means of acrylic resin. The self-adhesive tape is the optimal basic equipment for protection against slip hazards indoors and outdoors. It achieves the certified slip protection R13 and thus belongs to the highest level of our portfolio. Our wide range of colours offers you the optimal opportunity to adapt the tape to your application areas. It is ideal for slip-resistant floor marking of production areas, warehouses, stairways, outdoor areas, driveways and much more.
- Suitable for indoor and weather-protected outdoor areas
- Slip resistance R13
- Resists intensive foot traffic and light forklift traffic
- Can be used on stairs, ramps, machines, vehicles, etc...
- Durable hold due to strong adhesive
- Durable and tear resistant
- Waterproof, chemical and mineral oil resistant
- Can be walked on immediately after installation
Technical Data
| Application area: |
Indoor and weather-protected outdoor areas |
| Material: |
Mineral grain embedded in synthetic resin |
| Thickness: |
0.9 mm ± 0.1 mm |
| Liner: |
Silicone paper |
| Adhesive: |
Acrylic |
| Adhesive strength: |
1.19 kgf/19 mm |
| Slip resistance: |
R13 |
| Temperature resistance: |
-15°C to +70°C |
| Application temperature: |
≥12 °C |
| Packaging unit: |
8 strips each 640 mm x 30 mm in set |
Further Information
It is possible to drive over the belt with floor conveyors. Turning and twisting on the tape with floor conveyors or similar heavy vehicles must be avoided and can lead to the destruction of the tape. To achieve optimum adhesion, the substrate must be free of release agents such as grease, oil, surfactants, dirt and dust. Store in a dry and UV-protected place at 10°C to 25°C.
Data sheets
+49 36602 2891-00